Crawl space installation and attic insulation is very important when winterizing your home.
There are many advantages some include; less problems with crawl space ventilation, pipes won't freeze, and energy efficiency.
I will explain how to insulate effectively.
Before beginning insulation of crawl spaces choose foundation.
Make sure all appliances in the crawl spaces have a powered combustion system before closing.
Insulation should be taped at the seams and then fastened.
After insulating, the house should be house wrapped or vapor barrier.
The First step in crawl space insulation is to seal all the leaks.
Be sure to seal band joist.
Pay special attention to drains, pipes and electrical wiring.
Next insulate and secure the area.
Some prefer fiberglass, others batt and blanket for crawl space insulation.
Place insulation over the entire area, filling gaps.
Use batts with a vapor barrier to cut and fit insulation around plumbing and electrical.
Use foam or foam and fiberglass for band joints and air ducts.
Use polyurethane foam for rim joist.
Foam sheet or fiber glass should be used on foundation walls.
Use insulation hangers 12-18" apart to hold in place.
Facing should face up unless you live in an area with mild winters and hot summers.
The final step is termites shield and moisture protection Install a termites shield between band joints and masonry foundation wall allow a 2-4" gap for termite inspection.
To stops moisture from entering the crawl space, seal the ground with polyethylene.
Next use a facing over top taping all of the seams.
Install a supply outlet for air.
Fiberglass is often used in attic insulation.
Apply the fiberglass with the backing facing toward you, stapling ever six inches.
You should custom fit uneven areas Pipes and wires to ensure an air tight seal.
Include floor joists tucking in the corners.
Use unfaced fiberglass around heat sources because the paper is flammable.
Leave 3'' around lights for air and cooling.
The last step in Attic insulation is to add an air tight moisture barrier across the rafters, if there are holes in the barrier patch with duct tape.
Once this is done make sure you have good ventilation to prevent ice damage and to allow hot air to escape.
Crawl space insulation and Attic insulation is very cost effective if done right.
Not only will it save on fuel costs but will add to the value of your home.
There are many advantages some include; less problems with crawl space ventilation, pipes won't freeze, and energy efficiency.
I will explain how to insulate effectively.
Before beginning insulation of crawl spaces choose foundation.
Make sure all appliances in the crawl spaces have a powered combustion system before closing.
Insulation should be taped at the seams and then fastened.
After insulating, the house should be house wrapped or vapor barrier.
The First step in crawl space insulation is to seal all the leaks.
Be sure to seal band joist.
Pay special attention to drains, pipes and electrical wiring.
Next insulate and secure the area.
Some prefer fiberglass, others batt and blanket for crawl space insulation.
Place insulation over the entire area, filling gaps.
Use batts with a vapor barrier to cut and fit insulation around plumbing and electrical.
Use foam or foam and fiberglass for band joints and air ducts.
Use polyurethane foam for rim joist.
Foam sheet or fiber glass should be used on foundation walls.
Use insulation hangers 12-18" apart to hold in place.
Facing should face up unless you live in an area with mild winters and hot summers.
The final step is termites shield and moisture protection Install a termites shield between band joints and masonry foundation wall allow a 2-4" gap for termite inspection.
To stops moisture from entering the crawl space, seal the ground with polyethylene.
Next use a facing over top taping all of the seams.
Install a supply outlet for air.
Fiberglass is often used in attic insulation.
Apply the fiberglass with the backing facing toward you, stapling ever six inches.
You should custom fit uneven areas Pipes and wires to ensure an air tight seal.
Include floor joists tucking in the corners.
Use unfaced fiberglass around heat sources because the paper is flammable.
Leave 3'' around lights for air and cooling.
The last step in Attic insulation is to add an air tight moisture barrier across the rafters, if there are holes in the barrier patch with duct tape.
Once this is done make sure you have good ventilation to prevent ice damage and to allow hot air to escape.
Crawl space insulation and Attic insulation is very cost effective if done right.
Not only will it save on fuel costs but will add to the value of your home.
SHARE
