Tape dispenser is a certain useful supply that will be perfect to support packing activity whenever you need.
It allows you to hold a large roll of tape that will help you to speed up your activity in sealing boxes or any other objects easily.
Surely, it will give you a lot of easiness since you can not unroll the tape and cut it with only one hand.
Therefore, providing this certain supply in your home or business place will be something important to do.
Surely, you can easily load a new roll of tape when your dispenser is running out of tape.
You should not worry about the installation since it is quite easy to do.
What you need to do first is preparing the replacement roll of the tape.
Then, you can continue by unhooking the plastic tabs and separating the dispenser into two halves.
Then, spread those halves of the dispenser gently so you can easily remove the empty roll.
Slip the new roll in your dispenser until it unrolls the smooth side next to the teeth.
Hook the plastic tabs and set the halves of the dispenser up into a single device.
Then, you should pull some inches of the tape and slip it under the plastic feeders.
Usually, the feeders are located about an inch behind the metal teeth.
If you need to use your dispenser to pack your boxes, you can pull the tape forward further than the teeth.
Then, you should stick down the end of the tape, and move the dispenser backward.
The tape will be slide out of the dispenser and you just need to track it to any area that you need to seal or pack.
Twist the dispenser whenever you need to cut the tape.
The teeth of the dispenser will engage an end of the tape.
Therefore, ripping and tearing motion could be created to cut the tape perfectly.
With this easiness in reloading replacement roll of tape, running out of tape in the middle of packing activity is no longer problem for you.
Just install the replacement and you can continue your job smoothly.