- 1). Prepare the working area. Find a well-ventilated and well-lit area, such as a shed or garage, to perform the paint job. Minimize the number of people accessing the painting area. Use warning tape and notices to restrict access to the area. Close doors that lead to the area you will be working from. (See Reference 2.)
- 2). Protect nearby surfaces from contamination. Cover surfaces in the vicinity that you do not want to catch paint with 500-gauge polythene sheeting. Attach the 500-gauge polythene sheeting to non-asbestos surfaces with duct tape. (See Reference 2.)
- 3). Prepare the asbestos surface. Wipe a dusty surface with a damp rag or use the Class H vacuum cleaner to remove dust. Remove small bits of loose board or debris with a damp rag and put the bits in a stout waste container, such as a labeled polythene sack or clear polythene sack. Seal the waste container that has the debris with duct tape. Attend to minor damages on the asbestos sheet if they exist. Place a non-asbestos panel over damaged areas of the asbestos sheet to cover the areas. (See Reference 2.)
- 4). Apply low-solvent paint on the asbestos sheet. Use a low-pressure sprayer, brush or roller to apply the paint. Apply the paint in a sweeping motion over the entire surface of the asbestos sheet to achieve an even spread of paint. Avoid concentrating on one area when applying paint to avoid run-ins and surface damage. (See Reference 2.)
- 5). Allow the paint to dry. Read your paint manufacturer's instructions. Let the paint manufacturer's recommended time pass for the paint to dry completely.
SHARE
